Billet-specialties Brake Pedal - 55-57 Chevy (Non-Power Brake) Bedienungsanleitung PDF herunterladen

Brake Pad Installation Instructions

#199450 / #199455

Applications

• ‘55-‘57 Chevy

• ‘58-‘64 Bel Air, Biscayne, Impala

• ‘63-‘ 67 Nova

Tools Needed:

• 3/32” drill bit

• 5/16” drill bit

• Spray Adhesive

• Center punch

• 7/16” wrench

1. Remove rubber pedal pad

2. Cut out template and apply spray adhesive

to the back, align template with pedal and

attach.

3. Center punch the pedal in the center of the

holes as marked on the template. Four options

are provided for

manufacturing variations; check pedal arm

location as to which holes to drill.

4. Drill 3/32” pilot holes in each center punch,

follow by drilling with 5/16“ drill bit.

5. Install 1/4”-20 socket set screw in appropriate holes in billet pedal cover, install

billet pedal cover on pedal then attach washer and lock nut. Tighten firmly by

alternating turns at each nut with 7/16” wrench.

Extra hardware is provided – just in case.

.993

3.307

1.606 1.737

Brake Pad Installation Instructions

#199450 / #199455

Applications

• ‘55-‘57 Chevy

• ‘58-‘64 Bel Air, Biscayne, Impala

• ‘63-‘ 67 Nova

Tools Needed:

• 3/32” drill bit

• 5/16” drill bit

• Spray Adhesive

• Center punch

• 7/16” wrench

1. Remove rubber pedal pad

2. Cut out template and apply spray adhesive

to the back, align template with pedal and

attach.

3. Center punch the pedal in the center of the

holes as marked on the template. Four options

are provided for

manufacturing variations; check pedal arm

location as to which holes to drill.

4. Drill 3/32” pilot holes in each center punch,

follow by drilling with 5/16“ drill bit.

5. Install 1/4”-20 socket set screw in appropriate holes in billet pedal cover, install

billet pedal cover on pedal then attach washer and lock nut. Tighten firmly by

alternating turns at each nut with 7/16” wrench.

Extra hardware is provided – just in case.

.993

3.307

1.606 1.737

Due to multiple sources used by the auto manufacturer,

some pedals may have to be trimmed for the pedal

cover to fit properly.

Due to multiple sources used by the auto manufacturer,

some pedals may have to be trimmed for the pedal

cover to fit properly.

1

#199450 / #199455 1

Inhaltsverzeichnis

Seite 1 - #199450 / #199455

Brake Pad Installation Instructions#199450 / #199455Applications• ‘55-‘57 Chevy• ‘58-‘64 Bel Air, Biscayne, Impala• ‘63-‘ 67 NovaTools Needed:• 3/32”

Kommentare zu diesen Handbüchern

Keine Kommentare